| SPECIFICATIONS | | Green Laser | 515nm, <5mW, Class 3R | | Housing Material | Fiber Reinforced Nylon PA66 | | Dimension | 2.3(L)*1.0(H)*1.2(W)/inch
57.7(L)*24.6(H)*30.53(W)/mm | | Net Weight | 1.85oz(52.5g) | | Battery Type | Build-in Rechargeable Battery | | Working Mode | Constant/ Pulse | | Battery Runtime | Constant 1hrs/ Pulse 1.5hrs |
Features •Tactical Low Profile Compact W/E Adjustable Green Laser •Light Weight and Reinforced Structure Design •Mode Switchable between Constant and Pulse •ntegrated Weaver/Picatinny Mounting Deck •Push Button Switch for Power On/off and Mode Selection •Glove Friendly Smart-Sense Momentary On/off Switch for Silent and
Quick Operation •Build-in Rechargeable Battery Compatible with USB Type-C Charger
Charging Battery •Uncover the rubber cap of the USB Charging Socket. •As illustrated in Figure 1, plug the USB cable and connect it to
the USB power adaptor.
Mounting the product on a Weaver/Picatinny Rail •Loosen the Locking Screw. •Push and hold the Locking Screw, align the Locking Screw with the
groove on the rail, clamp the unit onto the rail, release and
tighten the Locking Screw.
Operation •Click on the Push Button Switch to turn on/off the unit. •Turn on the unit, put finger over the Smart-Sense Momentary On/off
Switch to momentarily turn off the unit. Remove the finger and the unit will turn back
on. •Turn on the unit, and make sure the Smart-Sense Momentary On/off
Switch is not being covered. Press and hold on the Push Button
Switch for 3 seconds to change the Working Mode. •Adjust the Laser W/E Adjustment Screws to sight in the laser.
| 
